NEW

How to Build a Side Pool Deck

Step 7: Place remaining 4"x4 "posts and Dek-Block® piers.

Position the Dek-Block® piers beneath the 2"x6" support boards using the dimensions found on the Side Pool Deck plans. Measure the distance from the bottom of the 2"x6" support board to the bottom of the post pocket of the Dek-Block® pier. Cut all remaining 4"x4" posts to length and position accordingly.

Loosening the bottom screw from the 2"x6" end board into the 2"x6" support board can help fit the 4"x4" post between the Dek-Block® pier and the 2"x6" support board. After all 4"x4" posts are positioned, secure all screws from the 2"x6" end board into the 2"x6" support boards.

After all 4"x4" post are cut and positioned, toe-screw two - 2 1/2" deck screws from each side of the 2"x6" support board into each of the 4"x4" posts.

Toe-Screwing Supports

Printable Step by Step Instructions

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

© 2008 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.