You are here
CustomDeckPlans.com
If you don’t feel comfortable modifying a plan or you have something that is too complex to even imagine, try www.CustomDeckPlans.com CustomDeckPlans.com is a full service planning and design firm specializing in DekBrands Floating Foundation Deck System.
Plan Types For Purchase
How to Build the Deluxe Pool Deck
Step 7: Cut remaining 4"x4" posts.
Go down each row measuring the distance between the bottom of the 2"x6" support board and the bottom of the slot of the Dek-Block® pier. Cut 4"x4" posts to length and position them between the support board and the Dek-Block® pier. Repeat this step until all 4"x4" posts are cut and positioned. Secure all support boards and 4"x4" posts using two 2 1/2" deck screws at an angle (toe screw) from each side.
Article index
- Step 1: Place the "Core" rectangle
- Step 2: Cutting the first 4"x4" posts to length..
- Step 3: Level the support board.
- Step 4: Cutting the opposite edge 4"x4" posts to length.
- Step 5: Square the Frame.
- Step 6: Position support boards and Dek-Block® piers.
- Step 7: Cut remaining 4"x4" posts.
- Step 8: Construct the angled perimeter.
- Step 9: Complete interior framing.
- Step 10: Building out from the core.
- Step 11: Completing the frame.
- Step 12: Attach the blocking boards along the inside edge.
- Step 13: Attach 2"x4" Diagonal Bracing Boards
- Step 14: Secure decking
- Step 15: Attach handrail posts.
- Step 16: Attach handrail boards..
- Step 17: Secure spindles
© 2012 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc.
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer
