You are here
CustomDeckPlans.com
If you don’t feel comfortable modifying a plan or you have something that is too complex to even imagine, try www.CustomDeckPlans.com CustomDeckPlans.com is a full service planning and design firm specializing in DekBrands Floating Foundation Deck System.
Plan Types For Purchase
How to Build a Splash Pool Deck
Step 4: Attaching Diagonal Bracing
Place a 2"x4" board diagonally behind the 4"x4" posts. With a pencil, mark the angle at each end and cut. Attach the 2"x4" diagonal board by toe-screwing two - 2 1/2" deck screws from each side. Repeat the process, alternating angles from section to section. Bracing should be placed between the posts along the outside perimeter of the deck, and the 4"x4" posts perpendicular to the pool. The 2"x4" bracing boards along the outside perimeter of the deck will need a compound miter cut (a cut angled in two directions - vertically and horizontally).
See Splash Pool Deck Plan for locations of 2"x4" bracing boards.
Article index
- Step 1: Build Support Frames and Attaching Metal Brackets - Continued
- Step 2: Positioning Dek-Block® Piers and Leveling Posts
- Step 3: Attaching Support Frames
- Step 4: Attaching Diagonal Bracing
- Step 5: Attach Handrail Post Bracket
- Step 6: Attaching Deck Surface Boards
- Step 7: Attaching Diagonal Bracing - continued
- Step 8: Attaching Handrail Post - continued
- Step 9: Attaching Handrail
- Step 10: Attaching Handrail - continued
© 2012 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc.
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer
