Home How To Build Shed Floors
How to Build a Shed Floor
How to Build a Shed Floor - Step #7
Page 7 of 9

Step 7: Fill remaining 4"x4" Posts.

How to Build a Shed Floor - Step 7
Begin by going down each row, measuring the distance between the 2"x6" support board and the Dek-Block® pier. Next, cut 4"x4" posts to length and position between the support board and the Dek-Block® pier. Repeat until all 4"x4" posts are cut and positioned. Secure all support boards and 4"x4" posts using two 2 1/2" deck screws at an angle from each side (toe-screw).

Deckman's Comments

This is a great job for 2 people. Have one person measure the height for the 4"x4" post, and another person make the cut. Next, go down the rows measuring and cutting all of the posts; then place all the posts at the same time. This may require lifting the frame up slightly in order to get the post under the support board.

If you are building by yourself, go down the rows measuring the height for the 4"x4" posts. Write the measurement on a piece of paper and on the side of the support board. Cut all the 4"x4" posts at once, then position.

Toe-Screwing Supports

How to Build a Shed Floor - Step 7














 
Banner

Printable Step by Step Shed Floor Instructions


The printable version of our instructions are in Adobe PDF format. You must have Adobe Reader to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Banner

CustomDeckPlans.com

Custom Deck Plans

If you don’t feel comfortable modifying a plan or you have something that is too complex to even imagine, try www.CustomDeckPlans.com
CustomDeckPlans.com is a full service planning and design firm specializing in DekBrands Floating Foundation Deck System.

Plan Types for Purchase